Home > automatic slatted covers > Rollin
The automatic slatted cover in-ground Rollin is designed for pools from 2.00 x 3.00 m to 10.00 x 16.50 m.
An essential complement to the DEL automatic slatted covers, the hanging kits ensure that your pool is completely closed. A wide range of colours allows you to match the kits to the colour of your cover. Ask your pool specialist for advice.
Maintenance
Wintering
Rollin is a swimming pool safety cover designed to prevent children under 5 from entering the pool. This product complies with standard NF P 90-308. It is not a substitute for common sense or individual responsibility. Nor is it intended to replace the vigilance of parents and/or responsible adults, who remain the essential factor in protecting young children. A child can drown in less than 3 minutes; no type of protection can ever replace the supervision and vigilance of a responsible adult. Warranty: 3 years for the motor and blades, 2 years for the reel in accordance with our general sales conditions. Manufacturing sheet: To ensure that automatic slatted cover is correctly fitted to the pool, it is essential to provide a plan of the pool, measured every meter. In accordance with standard NF P 90-308, the clearance between the inside of the pool and the edge of automatic slatted cover must be less than 70 mm. Operating time: 3 minutes for automatic opening or closing and 30 seconds for locking or unlocking the safety kits. The Rollin can be opened and closed by a single person. Use: all seasons. For proper operation, maintain a constant water level corresponding to normal pool filtration. A water level regulator is essential. Water level must comply with instructions. Limits of use: The installation of an automatic cover DEL on pools with an overflow and/or a lengthwise staircase (detachable staircase on the side) does not comply with standard NFP 90-308. Another standardized device should be used. Unless otherwise specified by the manufacturer, immersion alarms are not compatible with DEL covers. Wintering: Winter your pool according to its geographical location. Without lowering the water level, close the automatic slatted cover in the safety position and, if necessary, install a winterizing net to protect the automatic slatted cover. If the water level drops, to keep the parts to be sealed out of the water, roll up the automatic slatted cover and secure the pool with a safety winter cover. Packaging: for 5.00 x 10.00 m. pools. Opaque PVC 84 slats 4 packages of 5.10 x 0.39 x 0.11 m - 190 kg / Solar polycarbonate slats and Opaque PVC 69 slats : 5 packages of 5.10 x 0.25 x 0.20 m - 250 kg / Mast: 1 package of 5.10 x 0.15 x 0.15 m - 40 kg / Beam: 1 package of 5.10 x 0.15 x 0.15 m - 34 kg / Grating: 1 pallet of 1.20 x 1.00 x 0.50 m - 100 kg / Motorization kit: 1 package of 0.60 x 0.35 x 0.35 m - 20 kg / Beam support: 1 package of 0.30 x 0.20 x 0.20 m - 10 kg / Hanging kits: 1 package of 0.30 x 0.20 x 0.20 m - 5 kg/ Total weight: 400 - 410 kg.